Quality video over ordinary telephone wire...

Features:

• Power-Video-Data (PVD) signals are routed via UTP and RJ45 or "Press-Fit"
• terminal block for organized pass-through of inputs/outputs
• Mini-coax pigtail supports in-camera mounting in most dome cameras
• Use with the RJ45 connector based NV-704J-PVD or the NV-716J-PVD for
• organized cable management to your control equipment from the IDF
• Up to 3,000ft (1km) with an NVT active receiver or hub
• Supports "up-the-coax" type control signal up to 750ft (225m)
• Exceptional interference rejection
• Built-in transient protection

The NVT Model NV-218A-PVD Video Transceiver with Power and Data is a passive
(non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type aresupported.

This new product incorporates the transceiver engine of NVT's popular NV-213A video transceiver with the added value of Power and Data connections to and from the camera. Power, Video and Data are routed via UTP and RJ45 or "press-fit" terminal block inputs/outputs. Used at the camera, the passive NV-218A-PVD has a 9" mini-coax pigtail lead for direct video output connection from the camera. Along side this coax lead are two sets of "press-fit" terminal blocks for quick pass through connections for your camera's Power and Data. On the "house" or output side of the product you have the option of using convenient "press-fit" UTP connectors or the more efficient RJ45.

The unparalleled interference rejection and low emissions of the NV-218A-PVD allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. As with all NVT products, the NV-214A carries a limited lifetime warranty and is UL and cUL listed.