Anzeige
|
| PRO-4-PRO Newsletter: Safety at Work |
CR:110AIS Intrinsically Safe doseBadge Personal Noise Dosemeter
Supplier: Cirrus Research plc
The CR:110AIS is a version of the CR:110A doseBadge Personal Noise Dosemter with Intrinsic Safety Certification. The CR:110AIS carries ATEX and EEx approval for both Group II (Non-Mining Applications) and Group I (Mining Applications). The CR:110AIS has the same performance and specifications as the standard CR:110A version of the doseBadge, but has several significant differences to allow it to carry the ATEX and EEx certification. Please refer to the CR:110A doseBadge for details of the acoustic measurements provided. ...
Yes, I would like further information about this product from the manufacturer/service provider.
|
Mayser Safety Mats
Supplier: MAYSER GmbH & Co. KG
 Mayser Safety Mats are especially suitable for making hazardous zones safe over a wide area. They offer maximum protection for hazardous areas of movement, for machines, robots or transfer lines. For any shape of area! Depending on requirements, there are safety mats with rubber surface topping for anti-slip protection and/or to avoid the danger of tripping - also with matching ramp rails.
Mayser Safety Steps also ensure maximum protection of bus and train passengers. In dangerous situations a...
Yes, I would like further information about this product from the manufacturer/service provider.
|
Airport maintenance
Supplier: AEARO GmbH
 A common reason that people are careless with hearing protectors is that they choose the wrong one. Too large a unit can be uncomfortable, and hearing speech and other signals may be unnecessarily difficult. But how do you know what’s right for you? The basic rule is that you should always wear hearing protection 100 % of the time you spend in environments with an A-weighted noise level of 85 dB or higher. How damaging the noise environment is to your ears is determined by the noise level and the length of time you spend in it. For example, eight ...
Yes, I would like further information about this product from the manufacturer/service provider.
|
Hand-held eye showers
Supplier: Breuell & Hilgenfeldt GmbH
 Two showers in one - that is possible with the new construction of these eye wash units according to EN 15154-2:2006. You don't have to decide, if you need a mounted eye shower or a hand-held eye shower: You can use the hand-held eye shower in the wall bracket as a mounted eye shower. You can take the hand-held eye shower out of the bracket and use it as a flexible hand-held eye shower - you can help on the floor lying injured people...
Yes, I would like further information about this product from the manufacturer/service provider.
|
A watertight matter
Supplier: L. Priebs GmbH & Co. KG
 The new Aqua² Profi Boot is one of the highlights of the current collection of the safety footwear brand Lupriflex®. The S3 lace-up boot Aqua² Profi Boot (ref. no. 3-358) convinces by its high-quality equipment at the latest technical status. The lining is the key: The breathable climatic membrane L-Skin possesses a water column of more than 5.000 mm. Its laminate technique delivers absolute water resistance. For comparison: Rain wear is considered to be water resistant with a water column of 1.300 mm as defined by the standards. Furthermore, the upper material consists of hydrophobized smooth cow leather. This means squared protection ...
Yes, I would like further information about this product from the manufacturer/service provider.
|
HyFlex 11-920 - General-purpose knitted and dipped gloves
Supplier: Ansell GmbH
 Combining a sure grip on lightly oiled parts with keeping hands clean and protected from oil contamination has been a real challenge. Now Ansell introduces the uncompromising HyFlex® 11-920. Designed with patented Ansell Grip Technology™, the glove provides an excellent grip on lightly oiled parts while protecting skin from oil contamination. The 11-920 also offers all the essential features of the HyFlex® range of gloves, including durability, comfort and...
Yes, I would like further information about this product from the manufacturer/service provider.
|
A signal tower that talks to you!
Supplier: WERMA Signaltechnik GmbH & Co.KG
 Ever wondered how you can address your machine operators directly with a spoken text to ensure a rapid response? Or how to issue clear, unmistakable directives? Maybe even in different languages? You could even announce break times with an encouraging “Let’s have a break” instead of the usual gong. You may be looking for a way to provide clear instructions in a workshop for the blind, or to...
Yes, I would like further information about this product from the manufacturer/service provider.
|
LucYa - Standalone biometric access control system
Supplier: Impro Technologies
 Autonomous access control by biometrics/proximity, with capacity of up to 500 users and 25.000 transactions in non-volatile memory. There is the option to use only Fingerprint, only Tag, Fingerprint plus Tag or even the option of Fingerprint or Tag. It includes a Mifare proximity reader and a fingerprint reader. It includes a...
Yes, I would like further information about this product from the manufacturer/service provider.
|
MARIGOLD INDUSTRIAL LAUNCHES BRAND NEW CHEMICAL PERMEATION CHART
Supplier: Comasec GmbH
 Hand protection expert Marigold Industrial has launched a brand new chemical permeation chart providing essential glove performance data against 100 commonly used industrial chemicals. The new chart, which comes complete with free magnifier, is an essential reference tool for anyone with responsibility for selecting hand protection for people coming into direct contact with chemicals as part of their job. According to the company, part of Comasec International Group, the new version of its unique and extremely popular chart is an important step in its...
Yes, I would like further information about this product from the manufacturer/service provider.
|
|
Please click here for further product news from this sector.
If you would like to see your products displayed in the PRO-4-PRO product newsletter please contact us: +49/(0)6151/8090-247 or pro-4-pro@gitverlag.com. |
|
|
Anzeige
|
| If you do not wish to receive any more PRO-4-PRO Product-Newsletters, please click here: Unsubcribe Newsletter |
PRO-4-PRO
GIT VERLAG GmbH & Co. KG
Tel: 06151-80 90 193
Fax: 06151-80 90 176
Roesslerstraße 90
64293 Darmstadt
www.gitverlag.com
www.pro-4-pro.com
|
|
|
|
|
